A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
New Jimny project - a few questions!
- X-Eng Simon
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
27 Feb 2012 11:22 #34312
by X-Eng Simon
Replied by X-Eng Simon on topic Re: New Jimny project - a few questions!
Unfortunately, this year the indoor 4x4 clashes with something else I cannot avoid - so we will not be there!
Si
Si
Please Log in or Create an account to join the conversation.
- darthloachie
- New Member
-
Public
Less
More
- Thank you received: 0
27 Feb 2012 15:11 #34326
by darthloachie
shame - it would have been nice to meet you
Chris
Replied by darthloachie on topic Re: New Jimny project - a few questions!
X-Eng Simon wrote: Unfortunately, this year the indoor 4x4 clashes with something else I cannot avoid - so we will not be there!
Si
shame - it would have been nice to meet you
Chris
Please Log in or Create an account to join the conversation.
- aniesigh
- New Member
-
Public
Less
More
- Thank you received: 0
27 Feb 2012 21:00 #34360
by aniesigh
Replied by aniesigh on topic Re: New Jimny project - a few questions!
looking good si!
Please Log in or Create an account to join the conversation.
- X-Eng Simon
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
02 Mar 2012 10:46 - 02 Mar 2012 10:51 #34650
by X-Eng Simon
Replied by X-Eng Simon on topic Re: New Jimny project - a few questions!
Too big?
It is, but only by about 20mm - and there is nothing more of the bodywork that I can cut away.
In the pictures, it is pretty much sat on the bump stops - no pressure in the shocks.
These (Fedima TrialAde 10.5x35") stand 36.5" tall. Ironically if they were actually 35" they would be fine.
Should I:
1. Extend the bump stops, loose a couple of inches travel - and live with it. Or
2. Flog these and buy a set of Simex or similar 35"
Si
Attachment Tyre002.jpg not found
It is, but only by about 20mm - and there is nothing more of the bodywork that I can cut away.
Attachment Tyre001.jpg not found
In the pictures, it is pretty much sat on the bump stops - no pressure in the shocks.
These (Fedima TrialAde 10.5x35") stand 36.5" tall. Ironically if they were actually 35" they would be fine.
Should I:
1. Extend the bump stops, loose a couple of inches travel - and live with it. Or
2. Flog these and buy a set of Simex or similar 35"
Si
Attachments:
Last edit: 02 Mar 2012 10:51 by X-Eng Simon.
Please Log in or Create an account to join the conversation.
- Old Blind Dog
- New Member
-
Public
Less
More
- Thank you received: 0
02 Mar 2012 11:38 - 02 Mar 2012 11:42 #34652
by Old Blind Dog
Replied by Old Blind Dog on topic Re: New Jimny project - a few questions!
Last edit: 02 Mar 2012 11:42 by Old Blind Dog.
Please Log in or Create an account to join the conversation.
- darthloachie
- New Member
-
Public
Less
More
- Thank you received: 0
02 Mar 2012 12:08 #34656
by darthloachie
Replied by darthloachie on topic Re: New Jimny project - a few questions!
what about maxxis creepy crawlers - supposed to come out about 1/2 inch undersize and are popular on the trials scene
the simex copies always come out oversize about 1 1/2" so you could put 33s on and they'd come out 34.5"
the simex copies always come out oversize about 1 1/2" so you could put 33s on and they'd come out 34.5"
Please Log in or Create an account to join the conversation.
Time to create page: 0.632 seconds