A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

No MOT:(

idiotmobil
New Member
Public

23 Dec 2013 15:11 #97269 by idiotmobil

Replied by idiotmobil on topic No MOT:(

if the top ones good keep hold of it as a spare as it seams the bottom goes way before the top my bottom ones was cracked and completely knackered but top looked new and as far as I could tell was still good to use im going to give it a go on other side and just change the bottom to one left over see how it goes mite get a bit more bearing for your money

Please Log in or Create an account to join the conversation.

jonesyba420
Topic Author
New Member
Public

23 Dec 2013 15:14 #97272 by jonesyba420

Replied by jonesyba420 on topic No MOT:(

Yea ill keep any good ones.maybe rotating them top for bottom every 6 months would prolong their life.

Please Log in or Create an account to join the conversation.

idiotmobil
New Member
Public

23 Dec 2013 15:20 #97273 by idiotmobil

Replied by idiotmobil on topic No MOT:(

Im just going to buy a set soon and do the bottom ones and clean up and degrease and regrease inspect cvs etc

Please Log in or Create an account to join the conversation.

helijohn
New Member
Public

23 Dec 2013 15:24 - 23 Dec 2013 18:26 #97277 by helijohn

Replied by helijohn on topic No MOT:(

jonesyba420 wrote: Any tips for removing the outer ring of the bearing? Heard it can be a sod, I dont have access to a welder so the tip In the guide doesnt help.

I thought it was going to be hard too but I used a hammer and a screwdriver and it was not too bad at all - just be careful to get the driver in the right place as the bearing race fit is so good it is hard see.

Last edit: 23 Dec 2013 18:26 by helijohn.

Please Log in or Create an account to join the conversation.

jonesyba420
Topic Author
New Member
Public

23 Dec 2013 15:32 #97280 by jonesyba420

Replied by jonesyba420 on topic No MOT:(

Cheers guys.

Just preying the weather tomorrow is not like todays high wind and rain!!

Please Log in or Create an account to join the conversation.

idiotmobil
New Member
Public

23 Dec 2013 15:47 #97282 by idiotmobil

Replied by idiotmobil on topic No MOT:(

im sorry to say im praying to wake up to snow have been for a wile ill try to hold of from it tonight for you but im not promising

Please Log in or Create an account to join the conversation.

Time to create page: 1.982 seconds

No MOT:(

Events Menu