A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

No MOT:(

helijohn
New Member
Public

21 Dec 2013 17:40 #97071 by helijohn

Replied by helijohn on topic No MOT:(

jonesyba420 wrote: Ahhhhh I see.it was indeed a question :laugh:

I know 100ml of water is 100grams, but wasnt sure if cv grease weighs more than water?I should imagine it does.

Ive got 80gram sachets of grease,should I put a whole one in each side or more or less?

Yes.
1 ml of grease weighs .88 grams. Thus 100ml grease weighs 88gm

Please Log in or Create an account to join the conversation.

jonesyba420
Topic Author
New Member
Public

21 Dec 2013 17:45 #97072 by jonesyba420

Replied by jonesyba420 on topic No MOT:(

Ok cheers chaps, ill put 1 and a bit sachets in then

Please Log in or Create an account to join the conversation.

helijohn
New Member
Public

21 Dec 2013 17:56 #97073 by helijohn

Replied by helijohn on topic No MOT:(

jonesyba420 wrote: Ok cheers chaps, ill put 1 and a bit sachets in then

Yes, use 1.1 sachets. :laugh: :laugh: :whistle:

Please Log in or Create an account to join the conversation.

jonesyba420
Topic Author
New Member
Public

23 Dec 2013 14:34 #97264 by jonesyba420

Replied by jonesyba420 on topic No MOT:(

Any tips for removing the outer ring of the bearing? Heard it can be a sod, I dont have access to a welder so the tip In the guide doesnt help.

Please Log in or Create an account to join the conversation.

idiotmobil
New Member
Public

23 Dec 2013 14:39 #97266 by idiotmobil

Replied by idiotmobil on topic No MOT:(

I just managed to get a chissle on the edge to knock it out there is a very slight lip

Please Log in or Create an account to join the conversation.

GuardianAngel
New Member
Public

23 Dec 2013 14:44 #97267 by GuardianAngel

Replied by GuardianAngel on topic No MOT:(

idiotmobil wrote: I just managed to get a chissle on the edge to knock it out there is a very slight lip

That's all I did to be honest. Just need to hit it very hard :-D

Please Log in or Create an account to join the conversation.

Time to create page: 0.645 seconds

No MOT:(

Events Menu