BigJimny Store
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

No MOT:(

  • idiotmobil
  • New Member
  • New Member
    Public
More
23 Dec 2013 15:11 #97269 by idiotmobil
Replied by idiotmobil on topic No MOT:(
if the top ones good keep hold of it as a spare as it seams the bottom goes way before the top my bottom ones was cracked and completely knackered but top looked new and as far as I could tell was still good to use im going to give it a go on other side and just change the bottom to one left over see how it goes mite get a bit more bearing for your money

Please Log in or Create an account to join the conversation.

  • jonesyba420
  • Topic Author
  • New Member
  • New Member
    Public
More
23 Dec 2013 15:14 #97272 by jonesyba420
Replied by jonesyba420 on topic No MOT:(
Yea ill keep any good ones.maybe rotating them top for bottom every 6 months would prolong their life.

Please Log in or Create an account to join the conversation.

  • idiotmobil
  • New Member
  • New Member
    Public
More
23 Dec 2013 15:20 #97273 by idiotmobil
Replied by idiotmobil on topic No MOT:(
Im just going to buy a set soon and do the bottom ones and clean up and degrease and regrease inspect cvs etc

Please Log in or Create an account to join the conversation.

  • helijohn
  • New Member
  • New Member
    Public
More
23 Dec 2013 15:24 - 23 Dec 2013 18:26 #97277 by helijohn
Replied by helijohn on topic No MOT:(

jonesyba420 wrote: Any tips for removing the outer ring of the bearing? Heard it can be a sod, I dont have access to a welder so the tip In the guide doesnt help.


I thought it was going to be hard too but I used a hammer and a screwdriver and it was not too bad at all - just be careful to get the driver in the right place as the bearing race fit is so good it is hard see.
Last edit: 23 Dec 2013 18:26 by helijohn.

Please Log in or Create an account to join the conversation.

  • jonesyba420
  • Topic Author
  • New Member
  • New Member
    Public
More
23 Dec 2013 15:32 #97280 by jonesyba420
Replied by jonesyba420 on topic No MOT:(
Cheers guys.

Just preying the weather tomorrow is not like todays high wind and rain!!

Please Log in or Create an account to join the conversation.

  • idiotmobil
  • New Member
  • New Member
    Public
More
23 Dec 2013 15:47 #97282 by idiotmobil
Replied by idiotmobil on topic No MOT:(
im sorry to say im praying to wake up to snow have been for a wile ill try to hold of from it tonight for you but im not promising

Please Log in or Create an account to join the conversation.

Time to create page: 1.026 seconds
Joomla template by a4joomla