A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
hello all, since having the gearbox replaced at 75k, a month later ive noticed the reversing lights dont work, ive fault found the following and i,m now stumped any ideas chaps?
1 no reverse lights when in gear., 2 disconnected connector on the wire coming from the switch on the passenger side of the gearbox .
and shorted it out, lights come on, unscrewed switch bolt on gearbox and tested it with meter and switch works . ??????
so its my thinking there is a rod in the gearbox that needs to push this in when engaged in reverse, but isnt ??? confused , have they fxxked
up on replacing the box? any ideas or can i put a switch in for the mot?
cheers Guys.
Did the Ball bearing fall out when they fitted it, not 100% sure there is one but it's a common way of operating a switch
Sent from my Nexus 6P using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
