A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Removing Jimny vacuum hub system?

Mraz
Topic Author
New Member
Public

20 Jan 2017 13:09 #177055 by Mraz

Replied by Mraz on topic Removing Jimny vacuum hub system?

It is a AISIN vacuum sensor/switch. It has only two white wires and one port for vacuum tube. And a tiny filter.

I've found a pic of it's position:

www.rhinoman.org/SuzukiStuff/Jimny/images/Vacuum_pipes1.jpg

Looks like this one but it has two white wires:

thumbs.ebaystatic.com/images/g/v9MAAOSwYIhWiUfR/s-l225.jpg

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

20 Jan 2017 19:52 #177073 by mlines

Replied by mlines on topic Removing Jimny vacuum hub system?

My guide to the vacuum system is here if it helps

www.bigjimny.com/mediawiki/index.php/Vac...for_front_wheel_hubs

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

helijohn
New Member
Public

20 Jan 2017 21:34 #177084 by helijohn

Replied by helijohn on topic Removing Jimny vacuum hub system?

Mraz wrote: Believe it or not - it works! I've bridged the connector coming to the vacuum sensor and light stopped flashing,

If it's what I did in this post about three years ago you'll be OK.
www.bigjimny.com/index.php/forum/7-jimny...-light-with-pictures

Please Log in or Create an account to join the conversation.

Mraz
Topic Author
New Member
Public

23 Jan 2017 07:07 #177183 by Mraz

Replied by Mraz on topic Removing Jimny vacuum hub system?

That's excellent! One less thing to worry about.

Thank you!

Please Log in or Create an account to join the conversation.

wilku
New Member
Public

23 Jan 2017 21:49 #177205 by wilku

Replied by wilku on topic Removing Jimny vacuum hub system?

helijohn - think you could put that on Wiki? I jsut recalled that I'd read your description a while ago but totally forgot about it when Mraz asked...

Please Log in or Create an account to join the conversation.

Time to create page: 0.149 seconds

Removing Jimny vacuum hub system?

Events Menu