A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

how to fix bent radius arm mount.

barnes
New Member
Public

02 Sep 2013 16:45 #81906 by barnes

Replied by barnes on topic Ive bent it, any ideas?

This is why you should have guards

Please Log in or Create an account to join the conversation.

markyp2000
New Member
Public

02 Sep 2013 16:53 #81908 by markyp2000

Replied by markyp2000 on topic Ive bent it, any ideas?

Undo that bolt in the pic

Once the arm is out find some thing that fits snug in the gap so it wont bent to much out of shape

Please Log in or Create an account to join the conversation.

jonesyba420
Topic Author
New Member
Public

02 Sep 2013 17:27 #81912 by jonesyba420

Replied by jonesyba420 on topic Ive bent it, any ideas?

markyp2000 wrote: Undo that bolt in the pic /quote]

can i do this with it up on drive on car ramps?

barnes wrote: This is why you should have guards /quote]

didnt expect to bottom out to be honest didnt look high enough to hit. guards are on my list as a priority mod.

Please Log in or Create an account to join the conversation.

Dave cc
New Member
Public

02 Sep 2013 18:01 #81915 by Dave cc

Replied by Dave cc on topic Ive bent it, any ideas?

Aint exactly a Greek tragedy hammer it back around

Please Log in or Create an account to join the conversation.

jonesyba420
Topic Author
New Member
Public

02 Sep 2013 18:06 #81916 by jonesyba420

Replied by jonesyba420 on topic Ive bent it, any ideas?

Clearly stated ive tried hammering it back.

Please Log in or Create an account to join the conversation.

iloveics
New Member
Public

02 Sep 2013 18:14 #81917 by iloveics

Replied by iloveics on topic Ive bent it, any ideas?

i'd leave it personally, won't cause any harm and i'm lazy

Please Log in or Create an account to join the conversation.

Time to create page: 0.234 seconds

how to fix bent radius arm mount.

Events Menu