A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
how to fix bent radius arm mount.
- Tadpole
- New Member
-
Public
03 Sep 2013 16:52 #82045
by Tadpole
Replied by Tadpole on topic how to fix bent radius arm mount.
Pleased to hear all your efforts paid off ............... 
Please Log in or Create an account to join the conversation.
- Wiltec17
- New Member
-
Public
03 Sep 2013 16:53 #82046
by Wiltec17
Seconded. Heat, hammer. Don't melt the bush. Get it up on stands to give yourself a better swing. If all else fails use a bigger hammer.
Replied by Wiltec17 on topic Ive bent it, any ideas?
JerseyJimny wrote: My drivers side has the problem... Solution?
Hammer
Prybar
Elbow grease
It will bend back
If all else fails apply heat and repeat
Seconded. Heat, hammer. Don't melt the bush. Get it up on stands to give yourself a better swing. If all else fails use a bigger hammer.
Please Log in or Create an account to join the conversation.
- Wiltec17
- New Member
-
Public
03 Sep 2013 16:57 #82048
by Wiltec17
Replied by Wiltec17 on topic how to fix bent radius arm mount.
Sorry didn't read all the way through the thread before posting :silly: Glad you got it sorted 
Please Log in or Create an account to join the conversation.
Time to create page: 0.284 seconds