A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Jimny Diff breathers

Busterbrown24
Topic Author
New Member
Public

19 May 2013 19:16 #71086 by Busterbrown24

Replied by Busterbrown24 on topic Jimny Diff breathers

Or is it abit more than a puddle haha?

Please Log in or Create an account to join the conversation.

Grizzly
New Member
Public

19 May 2013 19:32 #71090 by Grizzly

Replied by Grizzly on topic Jimny Diff breathers

600mm is about 2 foot...

Please Log in or Create an account to join the conversation.

Busterbrown24
Topic Author
New Member
Public

19 May 2013 19:40 #71091 by Busterbrown24

Replied by Busterbrown24 on topic Jimny Diff breathers

That will do me then. Thrown the jimny around off road abit today but avoided most water, but none of it was over 2 feet so I know what I'm doing when I get home from work tomorrow

Please Log in or Create an account to join the conversation.

markyp2000
New Member
Public

19 May 2013 19:58 #71097 by markyp2000

Replied by markyp2000 on topic Jimny Diff breathers

If you have no breather pipes i wouldnt go deeper than the depth of the top of the axle

Please Log in or Create an account to join the conversation.

kirkynut
Offline
Moderator
Registered

23 May 2013 16:14 #71469 by kirkynut

Replied by kirkynut on topic Jimny Diff breathers

I've just got garden hose on mine, which needs replacing every now and then as it splits, but it's cheap to do so and I have plentyof it.

Isn't there a kit you can buy somewhere - didn't there used to be a kit in the BigJimny Shop once upon a time???

I can't find any kits online like you can for LR's.

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

23 May 2013 19:13 #71478 by mlines

Replied by mlines on topic Jimny Diff breathers

My kit supplier went out of business.......

.....however some new parts for my testing turned up in the post today!

There were aspects of the old kits I did not like so the new one will be different.

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

Time to create page: 3.564 seconds

Jimny Diff breathers

Events Menu