A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

What did the postman bring today

  • Swifty
  • Visitor
  • Visitor
    Public
27 Nov 2013 22:34 #93514 by Swifty
Replied by Swifty on topic What did the postman bring today
Cheers Russ at jimnybits!!!!!


Attachments:

Please Log in or Create an account to join the conversation.

  • TomDK
  • Visitor
  • Visitor
    Public
27 Nov 2013 22:48 - 27 Nov 2013 23:02 #93521 by TomDK
Replied by TomDK on topic What did the postman bring today

Dave cc wrote:

TomDK wrote: Just received this from the UK :)




Just got me some more winching power B)


What is it ?:unsure: a early giggle pin twin motor setup ???


No, it's twin motor conversion done by Flamin Fabrications. An Australian company :)
www.flaminfabrications.com.au

They been doing it for years, pretty popular down under.
It's very easy to install, but needs a slight modification to the "front" motor shaft. A 3mm deep, 3/8" keyway needs to be cut.

Also cost far less than a Gigglepin twintop, but of course, does not come with different ratios.

Gigglepin sells them:
gigglepin4x4store.gostorego.com/winches-...-twin-motor-kit.html
Last edit: 27 Nov 2013 23:02 by TomDK.

Please Log in or Create an account to join the conversation.

  • Dave cc
  • Visitor
  • Visitor
    Public
27 Nov 2013 22:55 #93526 by Dave cc
Replied by Dave cc on topic What did the postman bring today
Jesus that mist put some strain on the 2nd motors pinion shaft where the drive gear fits

Please Log in or Create an account to join the conversation.

  • TomDK
  • Visitor
  • Visitor
    Public
27 Nov 2013 23:05 #93531 by TomDK
Replied by TomDK on topic What did the postman bring today

Dave cc wrote: Jesus that mist put some strain on the 2nd motors pinion shaft where the drive gear fits


Was my thought as well.
But have never heard of a motors shaft break. So not really something that I worry about :)

Please Log in or Create an account to join the conversation.

  • helijohn
  • Topic Author
  • Visitor
  • Visitor
    Public
27 Nov 2013 23:08 #93532 by helijohn
Replied by helijohn on topic What did the postman bring today
Got some new rechargeable batteries so I can continue to upload pics . :laugh:

Please Log in or Create an account to join the conversation.

  • DonegalGuy
  • Visitor
  • Visitor
    Public
29 Nov 2013 15:47 #93787 by DonegalGuy
Replied by DonegalGuy on topic What did the postman bring today
[IMG

Thanks to Member j99pre this arrived all packaged well and even has the protective condom over the odometer reset which mine is missing! Can never have enough protection ;) :laugh:

Please Log in or Create an account to join the conversation.

  • Wiltec17
  • Visitor
  • Visitor
    Public
29 Nov 2013 18:19 #93846 by Wiltec17
Replied by Wiltec17 on topic What did the postman bring today
5metre, 5 ton recovery strap. eBay bargain, hopefully will be ok for what I need for the time being :)

Please Log in or Create an account to join the conversation.

  • Caz
  • Visitor
  • Visitor
    Public
29 Nov 2013 20:22 #93893 by Caz
Replied by Caz on topic What did the postman bring today
A bill from the garage as i had a new Heater Matrix fitted :S

Please Log in or Create an account to join the conversation.

  • helijohn
  • Topic Author
  • Visitor
  • Visitor
    Public
29 Nov 2013 20:34 #93900 by helijohn
Replied by helijohn on topic What did the postman bring today

Caz wrote: A bill from the garage as i had a new Heater Matrix fitted :S


Ouch. :whistle:

Please Log in or Create an account to join the conversation.

  • GuardianAngel
  • Visitor
  • Visitor
    Public
17 Dec 2013 23:12 #96604 by GuardianAngel
Replied by GuardianAngel on topic What did the postman bring today
Today I got a second hand rear radius arm with a good set of bushes. I will sand it down, hammerite it in red and get it fitted over Christmas.

I have also ordered some new radius arm bolts from Bits4Vits and I suspect I am going to need to cut the old bolts as they are likely to be seized to the bushes :angry:

Please Log in or Create an account to join the conversation.

  • TomDK
  • Visitor
  • Visitor
    Public
18 Dec 2013 13:48 #96661 by TomDK
Replied by TomDK on topic What did the postman bring today
Just got these today:

Please Log in or Create an account to join the conversation.

More
18 Dec 2013 16:05 #96666 by Rhinoman

DonegalGuy wrote: Like an EEJIT I ordered the wrong key blanks as I looked at the key the wrong way up but after an email to the supplier they are sending 2 new blanks out to me free of charge or postage costs. Now that's service!
The key blanks are spring loaded and flick out of the fob with the push of a button. I now await the actuator to fit to the drivers door before installing the kit. You even get to choose what logo you want on the fobs so no prizes for guessing what logo I chose :laugh:


I have that kit for my Mazda Bongo, I don't recall the key having provision for the chip for the immo.

Some Suzukis and a bunch of motorcycles.

Please Log in or Create an account to join the conversation.

Time to create page: 0.236 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.