A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

What did the postman bring today

The Coil Spring
Offline
Senior Member
Registered

24 Jun 2026 16:08 #264751 by The Coil Spring

Replied by The Coil Spring on topic What did the postman bring today

ThatIsTooMuch wrote:
[...] a set of poly bushes to replace my worn rubber bushes that failed MOT.

Why the preference of the fancy coloured bushes instead of Suzuki originals? I have just bought original bushes for the rear arms. Are aftermarket poly bushes better?

Please Log in or Create an account to join the conversation.

Lambert
Offline
Moderator
Registered
The best Jimny in Harrogate...(that I own)

24 Jun 2026 16:54 #264753 by Lambert

Replied by Lambert on topic What did the postman bring today

Polly are easier to install without a press. They're allegedly longer lasting too. But they are usually harder and won't flex as much and will transmit more noise, vibration and harshness. They also put more strain on the mounting points which can cause the holes to oval or in extreme cases can find weaknesses in the metal itself. They aren't as bad for that as rose joints which are metal on metal.

Temeraire (2018 quasar grey automatic)
R.E.D Retired Extremely Dangerous
Bellerophon (2024 grello van) daily dose of disappointment.

Please Log in or Create an account to join the conversation.

fordem
Offline
Platinum Member
Registered

24 Jun 2026 18:31 #264754 by fordem

Replied by fordem on topic What did the postman bring today

Poly, at any suspension pivot point (on a Jimny, this will be the chassis end of the radius arms) will squeak as the suspension cycles, unless frequently lubricated, they will also wear quite rapidly if exposed to sand & grit, which sticks to the grease and contaminates it.

I would not recommend them on any vehicle that sees off road use.

Please Log in or Create an account to join the conversation.

ThatIsTooMuch
Offline
New Member
Registered

25 Jun 2026 11:54 #264756 by ThatIsTooMuch

Replied by ThatIsTooMuch on topic What did the postman bring today

For me it is purely for ease of installation with me not owning a press and needing it done in time for my MOT retest.

Please Log in or Create an account to join the conversation.

Time to create page: 0.249 seconds

What did the postman bring today

Events Menu