A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Snorkel fitted!
- Bigchridy
- Topic Author
- New Member
-
Public
15 Jan 2012 18:08 #30979
by Bigchridy
Its hard to see where your snorkel enters the wing in that picture. Have you not got a side on picture?
It looks like your snorkel might enter the wing a bit lower down than where my snorkel would run. You could always fiberglass over the hole?
I was looking at getting the same snorkel you have but I had seen that someone on here (cant remember their name!) had put their jimny on its side and it cracked the snorkel. It kind of put me off but then I guess any snorkel can get damaged if you hit it hard enough or drag it along the side of a gulley.
Chris
Replied by Bigchridy on topic Re: Snorkel fitted!
Keefe wrote: I've got one of those 'other' snorks on my Jim.
Made out of GRP, very brittle. I liked them because they don't run down the wing but after fitting it, I've 'gone off' it!
If I thought that fitting one of these would cover the hole left in the wing, I would be ordering one now.
Mmmm!
Don't know if you can see what I mean from this picture?
Its hard to see where your snorkel enters the wing in that picture. Have you not got a side on picture?
It looks like your snorkel might enter the wing a bit lower down than where my snorkel would run. You could always fiberglass over the hole?
I was looking at getting the same snorkel you have but I had seen that someone on here (cant remember their name!) had put their jimny on its side and it cracked the snorkel. It kind of put me off but then I guess any snorkel can get damaged if you hit it hard enough or drag it along the side of a gulley.
Chris
Please Log in or Create an account to join the conversation.
- reaper
- New Member
-
Public
- Bigchridy
- Topic Author
- New Member
-
Public
- reaper
- New Member
-
Public
15 Jan 2012 19:03 #30991
by reaper
Replied by reaper on topic Re: Snorkel fitted!
wow thats cheep ! thanks (yet again) 
Please Log in or Create an account to join the conversation.
- myers647
- New Member
-
Public
- Dutchjimny
- New Member
-
Public
Time to create page: 0.213 seconds