A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Jimny Front Recovery Points

goatboy
New Member
Public

20 Feb 2012 07:55 #33847 by goatboy

Replied by goatboy on topic Re: Jimny Front Recovery Points

Thread resurrection alert!

Did anybody get anywhere making some recovery points?
Love something suitable for the front of my Jimny with a standard bumper, something that I could screw towing eyes into would be awesome so they could be taken off most of the time...

Please Log in or Create an account to join the conversation.

adamatdraycott
Topic Author
New Member
Public

20 Feb 2012 08:06 #33848 by adamatdraycott

Replied by adamatdraycott on topic Re: Jimny Front Recovery Points

I've got a CAD drawing of something that should work. Just need someone to make one as a prototype.
I was planning on them being made from 6-10mm steel or alloy

They are basically a copy of the Jap ones... but one for each side

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

20 Feb 2012 08:18 #33849 by mlines

Replied by mlines on topic Re: Jimny Front Recovery Points

I have prototyping and fabrication available.....but no-one has managed to send me drawings/measurements over the years despite saying they would (thats not a dig at you Adam, just at everyone else who has previously said they could supply them!). And of course, up until very recently I did not have a standard Jimny to look at.

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

Jimnyash
New Member
Public

30 Aug 2012 05:09 #47096 by Jimnyash

Replied by Jimnyash on topic Jimny Front Recovery Points

I know I'm bumping a rather old thread here, but was there any more news on this project?

Please Log in or Create an account to join the conversation.

Time to create page: 0.168 seconds

Jimny Front Recovery Points

Events Menu