BigJimny Store
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

Jimny Front Recovery Points

  • goatboy
  • New Member
  • New Member
    Public
More
20 Feb 2012 07:55 #33847 by goatboy
Replied by goatboy on topic Re: Jimny Front Recovery Points
Thread resurrection alert!

Did anybody get anywhere making some recovery points?
Love something suitable for the front of my Jimny with a standard bumper, something that I could screw towing eyes into would be awesome so they could be taken off most of the time...

Please Log in or Create an account to join the conversation.

  • adamatdraycott
  • Topic Author
  • New Member
  • New Member
    Public
More
20 Feb 2012 08:06 #33848 by adamatdraycott
Replied by adamatdraycott on topic Re: Jimny Front Recovery Points
I've got a CAD drawing of something that should work. Just need someone to make one as a prototype.
I was planning on them being made from 6-10mm steel or alloy

They are basically a copy of the Jap ones... but one for each side

Please Log in or Create an account to join the conversation.

More
20 Feb 2012 08:18 #33849 by mlines
Replied by mlines on topic Re: Jimny Front Recovery Points
I have prototyping and fabrication available.....but no-one has managed to send me drawings/measurements over the years despite saying they would (thats not a dig at you Adam, just at everyone else who has previously said they could supply them!). And of course, up until very recently I did not have a standard Jimny to look at.
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Jimnyash
  • New Member
  • New Member
    Public
More
30 Aug 2012 05:09 #47096 by Jimnyash
Replied by Jimnyash on topic Jimny Front Recovery Points
I know I'm bumping a rather old thread here, but was there any more news on this project?

Please Log in or Create an account to join the conversation.

Time to create page: 0.168 seconds
Joomla template by a4joomla