Here is a real little beauty we came across at the AWDC event at Hogmoor today.
11567 Hits
Well following my day out and the June 2008 TV4x4 event at Avon Dassett a few more problems raised their ugly heads. We had a good days driving but it is a long haul back on the motorway for such a small, modified vehicle and it really took its toll.
7729 Hits
We went down to Oxley's Shaw to help out on repairing some of the hazards on the site. Afther winching some logs I went over to the Bombhole to re-tension the cable onto the winch. The strain of winching the Jimny proved too much and the winch burnt out! It was not a difficult pull so something was wrong. I took the winch apart and it was entirely burnt out, I think that there was a problem with the brake and it was winching not only the Jimny but was fighting the brake, the winch was destroyed.
8506 Hits
CB Radio is used in offroading, either for keeping in touch on a Play site or whilst green laning. With all the switch gear and other dash board wiring there is no room below the dashboard for the CB. Therefore I had to find somewhere to fit the radio.
10426 Hits
So having fixed the Offside Rear Shock absorber mount I (see HERE), I am now facing the failure of the nearside mount. Avid readers will remember that the Offside failed when the bolt unscrewed itself and fell off, stripping out the threads of the retainer on the way. I discussed this with other people and the believe is that the natural swinging action of the shock absorber loosens the bolt. I believe that on the Nearside mount the effect is opposite, with the bolt being continually tightened.
Over the weekend the Nearside rear shock absorber took a hit which finished off the rubbers inside the mount. I went to remove the shock absorber and found it impossible to shift the retaining bolt. Eventually the inevitable happened.......
The bolt sheared off
8123 Hits