BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Front hub compatibility and rear full float axle query

  • stimpy
  • Topic Author
  • New Member
  • New Member
    Public
More
24 Apr 2017 21:03 #180538 by stimpy
Front hub compatibility and rear full float axle query was created by stimpy
Just getting some bits together to complete a fully floating rear axle conversion and am looking at hubs.

My Jimny is a 51 non ABS car and i've seen some 2004 abs hubs. Are these compatible?

I've also read that sj front hubs are also compatible ( for a rear float conversion) - can anyone confirm?.

Thanks...

Please Log in or Create an account to join the conversation.

  • lammurai
  • New Member
  • New Member
    Public
More
25 Apr 2017 08:36 #180543 by lammurai
Replied by lammurai on topic Front hub compatibility and rear full float axle query
Why not go for sam/vit/gv fixed front hubs?

Please Log in or Create an account to join the conversation.

  • stimpy
  • Topic Author
  • New Member
  • New Member
    Public
More
25 Apr 2017 21:25 #180585 by stimpy
Replied by stimpy on topic Front hub compatibility and rear full float axle query

lammurai wrote: Why not go for sam/vit/gv fixed front hubs?


?Give me a clue please? lol...

Please Log in or Create an account to join the conversation.

More
26 Apr 2017 19:31 #180621 by X8GGY
Replied by X8GGY on topic Front hub compatibility and rear full float axle query

stimpy wrote:

lammurai wrote: Why not go for sam/vit/gv fixed front hubs?


?Give me a clue please? lol...


[img
Jimny Boogie Buggy Blog <<<>>> lil’bugga Buggy Blog

Please Log in or Create an account to join the conversation.

  • stimpy
  • Topic Author
  • New Member
  • New Member
    Public
More
26 Apr 2017 19:41 #180622 by stimpy
Replied by stimpy on topic Front hub compatibility and rear full float axle query
Thanks lads but i still have no idea what a sam/vit/gv hub concoction is. Lovely picture btw but still don't know what parts are off what!

I am aware that sj hubs will fit and obviously jimny hubs. Was only thinking of sticking with Jimmy so all the bearings and bits would be the same.. Otherwise i was going to use SJ units and have sourced some if necessary...

Please Log in or Create an account to join the conversation.

  • TomDK
  • New Member
  • New Member
    Public
More
26 Apr 2017 19:50 #180624 by TomDK
Replied by TomDK on topic Front hub compatibility and rear full float axle query
Where'd you get those solid hubs Dave? :)

Please Log in or Create an account to join the conversation.

Time to create page: 0.132 seconds
Joomla template by a4joomla