A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Front hub compatibility and rear full float axle query

stimpy
Topic Author
New Member
Public

24 Apr 2017 21:03 #180538 by stimpy

Front hub compatibility and rear full float axle query was created by stimpy

Just getting some bits together to complete a fully floating rear axle conversion and am looking at hubs.

My Jimny is a 51 non ABS car and i've seen some 2004 abs hubs. Are these compatible?

I've also read that sj front hubs are also compatible ( for a rear float conversion) - can anyone confirm?.

Thanks...

Please Log in or Create an account to join the conversation.

lammurai
New Member
Public

25 Apr 2017 08:36 #180543 by lammurai

Replied by lammurai on topic Front hub compatibility and rear full float axle query

Why not go for sam/vit/gv fixed front hubs?

Please Log in or Create an account to join the conversation.

stimpy
Topic Author
New Member
Public

25 Apr 2017 21:25 #180585 by stimpy

Replied by stimpy on topic Front hub compatibility and rear full float axle query

lammurai wrote: Why not go for sam/vit/gv fixed front hubs?

?Give me a clue please? lol...

Please Log in or Create an account to join the conversation.

X8GGY
Offline
Platinum Member
Registered
but currently AWOL

26 Apr 2017 19:31 #180621 by X8GGY

Replied by X8GGY on topic Front hub compatibility and rear full float axle query

stimpy wrote:
lammurai wrote: Why not go for sam/vit/gv fixed front hubs?

?Give me a clue please? lol...

Jimny Boogie Buggy Blog <<<>>> lil’bugga Buggy Blog

Please Log in or Create an account to join the conversation.

stimpy
Topic Author
New Member
Public

26 Apr 2017 19:41 #180622 by stimpy

Replied by stimpy on topic Front hub compatibility and rear full float axle query

Thanks lads but i still have no idea what a sam/vit/gv hub concoction is. Lovely picture btw but still don't know what parts are off what!

I am aware that sj hubs will fit and obviously jimny hubs. Was only thinking of sticking with Jimmy so all the bearings and bits would be the same.. Otherwise i was going to use SJ units and have sourced some if necessary...

Please Log in or Create an account to join the conversation.

TomDK
New Member
Public

26 Apr 2017 19:50 #180624 by TomDK

Replied by TomDK on topic Front hub compatibility and rear full float axle query

Where'd you get those solid hubs Dave?

Please Log in or Create an account to join the conversation.

Time to create page: 0.178 seconds

Front hub compatibility and rear full float axle query

Events Menu