A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Spring Height vs. Lift
Less
More
- Posts: 762
- Thank you received: 226
01 Apr 2016 00:27 #164722
by zukebob
I started out with nothing & still have most of it left
Replied by zukebob on topic Spring Height vs. Lift
Thanks Tom. It was the German site I contacted. It has only been a few days so expect I should hear something soon.
I started out with nothing & still have most of it left
Please Log in or Create an account to join the conversation.
01 Apr 2016 00:42 #164723
by NelsonB
Replied by NelsonB on topic Spring Height vs. Lift
Oh yes, I learned it before reading what you guys posted :0)
Thanks for that!
Thanks for that!
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 762
- Thank you received: 226
02 Apr 2016 00:54 - 09 Apr 2016 05:03 #164756
by zukebob
I started out with nothing & still have most of it left
Replied by zukebob on topic Spring Height vs. Lift
I hope this information is helpful to anyone thinking of a suspension change. I appreciate the feedback I received on the topic. What I have received from vendor data:
As always, I invite anyone who has additional information (or believes there is an error) to add their comments.
Thanks again to all who helped.
Bob

As always, I invite anyone who has additional information (or believes there is an error) to add their comments.
Thanks again to all who helped.
Bob
I started out with nothing & still have most of it left
Last edit: 09 Apr 2016 05:03 by zukebob.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9405
- Thank you received: 1876
02 Apr 2016 05:07 #164757
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
Bellerophon (2024 grello van daily
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Spring Height vs. Lift
Very useful. as a point of reference do you have any information on the stock springs?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
Bellerophon (2024 grello van daily
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 762
- Thank you received: 226
02 Apr 2016 05:24 #164758
by zukebob
I started out with nothing & still have most of it left
Replied by zukebob on topic Spring Height vs. Lift
I did have stock Free Height and will edit this post once I can find it again. OME was actually kind enough to supply the Spring Rate in their information. It is:
120lbf/in Spring Rate (front and rear)
120lbf/in Spring Rate (front and rear)
I started out with nothing & still have most of it left
The following user(s) said Thank You: Lambert
Please Log in or Create an account to join the conversation.
03 Apr 2016 19:36 #164822
by NelsonB
Replied by NelsonB on topic Spring Height vs. Lift
Realy much more useful, I also though RHD OME springs were diferent from LHD in just one side.
Tks Bob!
Tks Bob!
Please Log in or Create an account to join the conversation.
Time to create page: 0.939 seconds