A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Rear silencer

mickt
New Member
Public

09 Aug 2015 19:21 #149556 by mickt

Replied by mickt on topic Rear silencer

The old bolt shanks will need drilling out carefully if you want to retain the nuts which are welded on the pipe. or you could just grind them off the pipe and weld new nuts on or use a loose nut and bolt.

Please Log in or Create an account to join the conversation.

Time to create page: 0.853 seconds

Rear silencer

Events Menu