A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Factory Jimny Coil dimensions?
- jwriebe
- Topic Author
- New Member
-
Public
- TomDK
- New Member
-
Public
30 Sep 2014 17:07 - 30 Sep 2014 17:23 #125465
by TomDK
Well that changes things a bit
Can understand why you look in the US for springs. But the japanese also makes lots of aftermarket stuff for the Jimny. Also different suspension setups, arms, springs and so on
Don't know if you'll find anything of use here:
item.rakuten.co.jp/hb-1st/c/0000000140/
Replied by TomDK on topic Factory Jimny Coil dimensions?
jwriebe wrote: TomDK,
Really appreciate the info and the advice, great to have a solid community to help.
I am in Okinawa and have a "U.S." military address so the shipping is the same as in the States, minus a two + week wait time. This means that the U.S. suppliers end up being a bit cheaper than U.K. ones...as your "VAT" seems like a royal fleecing of the public to my un-initiated American eyes.
Again, thanks for all the input!
Jon
Well that changes things a bit
Can understand why you look in the US for springs. But the japanese also makes lots of aftermarket stuff for the Jimny. Also different suspension setups, arms, springs and so on
Don't know if you'll find anything of use here:
item.rakuten.co.jp/hb-1st/c/0000000140/
Last edit: 30 Sep 2014 17:23 by TomDK.
Please Log in or Create an account to join the conversation.
- ElRoy
- New Member
-
Public
Time to create page: 0.147 seconds