A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
PCD of FRont Discs for a 54'plate Jimny
12 Aug 2010 15:00 #4201
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:PCD of FRont Discs for a 54'plate Jimny
As 190760 is less than 203805, you are 107 - which makes it the same as most SJs and Vits as well.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1249
- Thank you received: 115
12 Aug 2010 15:41 #4202
by maverick
Jalapeño, IISY?
Replied by maverick on topic Re:PCD of FRont Discs for a 54'plate Jimny
Thanks Martin.
Jalapeño, IISY?
Please Log in or Create an account to join the conversation.
13 Aug 2010 16:05 #4218
by DVF
Replied by DVF on topic Re:PCD of FRont Discs for a 54'plate Jimny
So this'll be why I had to take the angle grinder to the hole in my replacement discs!
Please Log in or Create an account to join the conversation.
Time to create page: 0.391 seconds