A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Cutting up a £16k jimny

More
24 Jan 2019 15:17 #201623 by mlines
Replied by mlines on topic Cutting up a £16k jimny
The problem they will have is that they will be selling a product they cannot source the basic donor car for!

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
24 Jan 2019 16:10 - 24 Jan 2019 16:12 #201626 by Lambert
Replied by Lambert on topic Cutting up a £16k jimny

facade wrote:

Lambert wrote: Why not it's only a thing? And in the grand scheme of things not a very rare, expensive [b]or unobtainable thing at that.[/b]


Tell that to those of us with unfilled orders....... :laugh: :laugh:

However, it is theirs to do with as they wish.......


It's a Jimny not a buggati royale! :laugh:

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
Bellerophon (2024 grello van daily
ADOS Attention Deficit Ooooh Shiny!
Last edit: 24 Jan 2019 16:12 by Lambert.

Please Log in or Create an account to join the conversation.

More
24 Jan 2019 17:57 #201635 by mlines
Replied by mlines on topic Re:Cutting up a £16k jimny
Thinking about it, it is going to be expensive. Whilst the current one they build can be built off a used Jimny or a write-off, this new one had to be built off list price (ex-vat of course) They probably need it to make £5k on top of the vehicle and parts as it's a low volume production. This probably puts it over £20k ex-vat

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Daniel30
  • New Member
  • New Member
    Public
More
24 Jan 2019 18:30 #201637 by Daniel30
Replied by Daniel30 on topic Re:Cutting up a £16k jimny
Yeah why not, let's hope the end result is worth it :)

Please Log in or Create an account to join the conversation.

  • Hammo19
  • New Member
  • New Member
    Public
More
24 Jan 2019 18:37 #201638 by Hammo19
Replied by Hammo19 on topic Re:Cutting up a £16k jimny
It's only a SZ4 so go ahead but leave the SZ5s alone please

Please Log in or Create an account to join the conversation.

More
24 Jan 2019 18:45 #201639 by Riccy
Replied by Riccy on topic Re:Cutting up a £16k jimny
They will be in a race with shropshire quads and terramaxx to see who gets one out first. Will be an epic advertising thing for them mainly.

I guess they would convert a supplied car. Anyone rich and a bit mad?!

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

Time to create page: 0.256 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.