A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Allgrip spinng wheel method of 2019 Jimny..

Crumbs
Topic Author
New Member
Public

14 Dec 2019 16:09 #216453 by Crumbs

Replied by Crumbs on topic Allgrip spinng wheel method of 2019 Jimny..

Hi Busta.

Can I raise this subject after a one year induced coma?

Are there any hard facts on the way that the SZ5 Allgrip spinng wheel method of torque vectoring works now that some of us have had a year to play with the vehicle?

I can't see any details in the Jimny owners manual.

Following on for your view that it will detect and brake any individual wheel if it is spinning faster than the others.

Can I ask:-

In two wheel drive high ratio mode.
If one of the wheels spins should the spinning wheel be braked?
If both rear wheels spin should the wheel spinning faster be braked?

In four wheel drive high or four wheel low ratio mode.
If one of the wheels spins should the spinning wheel be braked?
If another one of the wheels spins while the first is active should the spinning wheel be braked only if it is on the other axle?

Given that one can move from two wheel drive to four wheel drive at 60 MPH and below does the risk of axle windup only occur in low ratio mode,

Please Log in or Create an account to join the conversation.

Time to create page: 0.264 seconds

Allgrip spinng wheel method of 2019 Jimny..

Events Menu