A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Relocation of the window switch?
- Stumpjumper
- New Member
-
Public
01 Apr 2018 19:28 #191150
by Stumpjumper
Replied by Stumpjumper on topic Relocation of the window switch?
I've checked out zookbobs seat plates, I'd like to gain height as well as length. Helijohns tubular design sounds like it gives both but I can't download the photo for some reason .
Please Log in or Create an account to join the conversation.
- helijohn
- New Member
-
Public
01 Apr 2018 19:58 #191151
by helijohn
Jimny ones are extremely simple as the seat is attached from directly above. So you can use square tube to dimensions to suit.
My Junior ones were a nightmare as the bolts attached on an angled surface for the front, a system used on a number of cars I have done.
Replied by helijohn on topic Relocation of the window switch?
Stumpjumper wrote: Helijohns tubular design sounds like it gives both but I can't download the photo for some reason .
Jimny ones are extremely simple as the seat is attached from directly above. So you can use square tube to dimensions to suit.
My Junior ones were a nightmare as the bolts attached on an angled surface for the front, a system used on a number of cars I have done.
Please Log in or Create an account to join the conversation.
- Stumpjumper
- New Member
-
Public
02 Apr 2018 16:35 #191199
by Keithy
Replied by Keithy on topic Relocation of the window switch?
I tried the switches down on the front of the door pockets above the speaker...very awkward to use....not given in though! 
Please Log in or Create an account to join the conversation.
- Stumpjumper
- New Member
-
Public
Time to create page: 2.329 seconds