A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
North Yorks Moors Laning
- Smoggy
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
06 Feb 2013 22:39 #61229
by Smoggy
Replied by Smoggy on topic North Yorks Moors Laning
Just all day job Rich. Castleton, Lealholm, Grosmont, Ingleby Greenhow, Rudland Rigg etc.
Please Log in or Create an account to join the conversation.
- Headless
- New Member
-
Public
Less
More
- Thank you received: 0
06 Feb 2013 23:08 #61239
by Headless
Replied by Headless on topic North Yorks Moors Laning
Thanks dude, I might wait until it's a bit older then start modding it then, we had to trade in our old GV and it was a good deal, I really was'nt looking at new but it was such a good deal we could'nt pass it up :whistle:
Please Log in or Create an account to join the conversation.
- ne-crock
- New Member
-
Public
Less
More
- Thank you received: 0
06 Feb 2013 23:54 #61252
by ne-crock
Replied by ne-crock on topic North Yorks Moors Laning
Yeah i'll be happy to map out the lanes for you smoggy, i have a few in dalby forrest i want to try look at, rather challenging but i wouldnt want to send you out there without a recy drive first,
Headless the only modification to mine is mud terrain tyres, on the route a couple of lanes have potential to catch the underside of your car but are possible to drive without depending on line choice etc
Headless the only modification to mine is mud terrain tyres, on the route a couple of lanes have potential to catch the underside of your car but are possible to drive without depending on line choice etc
Please Log in or Create an account to join the conversation.
- badboy-jimny
- New Member
-
Public
Less
More
- Thank you received: 0
07 Feb 2013 10:00 #61275
by badboy-jimny
Replied by badboy-jimny on topic North Yorks Moors Laning
Sounding good, I only have 2" lift bogger AT Wheels tyres and a snork. Dave 3
Please Log in or Create an account to join the conversation.
- ne-crock
- New Member
-
Public
Less
More
- Thank you received: 0
07 Feb 2013 11:05 #61280
by ne-crock
Replied by ne-crock on topic North Yorks Moors Laning
Oh yeah i'd forgot i have a snorkel also,
Which i'd say if you plan to do the second ford up glaisdale its needed, as the water come over my bonnet, it even managed to splash smoggys which is 6.5" higher, this ford can easily be bypassed and able to meet the others just down the road from it
Which i'd say if you plan to do the second ford up glaisdale its needed, as the water come over my bonnet, it even managed to splash smoggys which is 6.5" higher, this ford can easily be bypassed and able to meet the others just down the road from it
Please Log in or Create an account to join the conversation.
- badboy-jimny
- New Member
-
Public
Less
More
- Thank you received: 0
07 Feb 2013 12:05 #61282
by badboy-jimny
Replied by badboy-jimny on topic North Yorks Moors Laning
Sounds like a good test for the snorkels then, im not a hardened odf road mind. Although ill have a popat anything really lol im excited now :laugh:
Please Log in or Create an account to join the conversation.
Time to create page: 0.148 seconds