A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Looking to get a trolley jack and some axle stands for the standard jimny so I can get underneath properly. I wondered if this would do
Halfords 5 Piece Lifting Kit
. Or would I need something that would lift the jimny higher?
I have the same bits but bought separately. The jack is fine when used with the axle stands as the main support.
-- Sent from my HP TouchPad using Communities
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
I deal with these guys a'lot as I work for the one of the Leading garage equipment companies.
They would be able to supply a fully serviced Industrial trolley jack for not to many pennies, this is what I did, and a got a used quality jack with incredible lift height. Just look at the size of the saddles on the cheap jacks! I hate them.
Hi mate i think the halfords one is good for the price especially when they put them on special offer. They don't go as high as i would like so i use a block off wood to get the extra height.If i need to do anything under neith i just lift it with a FLT at work.
I have the jack to keep in the car just in case I need to change a wheel. Wouldn't want to get under it though. My 'garage' jack is one of these........
logo.
