An area for non Suzuki Jimny related chat. Keep it clean etc. as this is a public forum with young readers.
landrover stuck
Less
More
- Posts: 1251
- Thank you received: 115
13 May 2014 09:16 #115052
by maverick
Jalapeño, IISY?
Replied by maverick on topic landrover stuck
Jalapeño, IISY?
Please Log in or Create an account to join the conversation.
13 May 2014 10:35 #115056
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic landrover stuck
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- darthloachie
- New Member
-

Public
Less
More
- Thank you received: 0
13 May 2014 12:39 - 13 May 2014 12:41 #115066
by darthloachie
Replied by darthloachie on topic landrover stuck
Last edit: 13 May 2014 12:41 by darthloachie.
Please Log in or Create an account to join the conversation.
13 May 2014 13:27 #115070
by mlines
Plus a 2 tonne burger van sitting on its chassis rails on the ground having been bogged down by a Suburu Forester. I tried a double tow with the Forester and failed, then hitched up for a single tow. I then sank into the mud but because I was hitched to the trailer had no where to go other than forwards which was impossible,
Only consolation was that after I was recovered by a fully tricked up Toyota, he could not pull the wagon out either. Had to be dug out backwards in the end.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic landrover stuck
darthloachie wrote:
Oh dear .... road tyres and damp grass not a good combination
bit like special tracks and an icy snowy sloping driveway :laugh:
Plus a 2 tonne burger van sitting on its chassis rails on the ground having been bogged down by a Suburu Forester. I tried a double tow with the Forester and failed, then hitched up for a single tow. I then sank into the mud but because I was hitched to the trailer had no where to go other than forwards which was impossible,
Only consolation was that after I was recovered by a fully tricked up Toyota, he could not pull the wagon out either. Had to be dug out backwards in the end.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- helijohn
- New Member
-

Public
Less
More
- Thank you received: 0
13 May 2014 17:25 #115110
by helijohn
I was like that in my Paj the other day down to chassis rails but wahay, she drove out.
Replied by helijohn on topic landrover stuck
mlines wrote:
darthloachie wrote:
Oh dear .... road tyres and damp grass not a good combination
bit like special tracks and an icy snowy sloping driveway :laugh:
Plus a 2 tonne burger van sitting on its chassis rails on the ground having been bogged down by a Suburu Forester. I tried a double tow with the Forester and failed, then hitched up for a single tow. I then sank into the mud but because I was hitched to the trailer had no where to go other than forwards which was impossible,
Only consolation was that after I was recovered by a fully tricked up Toyota, he could not pull the wagon out either. Had to be dug out backwards in the end.
I was like that in my Paj the other day down to chassis rails but wahay, she drove out.
Please Log in or Create an account to join the conversation.
Time to create page: 0.265 seconds
