×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Crawler box and fitting kit

More
15 May 2009 13:47 #695 by TONK
Has anybody got fitted The off road armoury crawler box and fiting kit, this is the next big mod am looking at, always best to get advice from people that have it fitted. Is it a straight bolt of bolt on job, any info would be great.

Please Log in or Create an account to join the conversation.

More
15 May 2009 14:03 - 15 May 2009 14:14 #696 by mlines
Been there, done that and got the T-shirt.....

see...www.bigjimny.com/index.php?view=weblink&...m_weblinks&Itemid=61

....for my experience

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 15 May 2009 14:14 by mlines.

Please Log in or Create an account to join the conversation.

More
15 May 2009 20:34 #701 by TONK
Replied by TONK on topic Re:Crawler box and fitting kit
Hi Martin, great site picked up some fantastic tips and mods, have you got this setup in your truck?

Please Log in or Create an account to join the conversation.

More
16 May 2009 04:46 #702 by mlines
Yes, I have built up an SJ410 Rocklobster box and fitted it using the Off-Road armory kit to my Jimny. All the write ups about this are the ones on this site. You will need an SJ Front propshaft and need the capability of bending the SJ Transfer Lever (lots of heat!)

How about sending in pictures of your truck. If you email any pictures to This email address is being protected from spambots. You need JavaScript enabled to view it. then I will put them up

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
16 May 2009 09:11 #703 by TONK
Replied by TONK on topic Re:Crawler box and fitting kit
I will take some pics over the weekend, is it ok to advertise some events on your site.
Tonk

Please Log in or Create an account to join the conversation.

More
16 May 2009 09:46 #704 by mlines
Tonk,

All pictures are welcome and it is fine to advertise events on my site. I am the webmaster for tv4x4 club (www.tv4x4.co.uk) so if the event is down south and clashes with one of ours then perhaps I would have took take a different view on the event. Otherwise feel free to advertise.

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
20 May 2009 13:46 #717 by TONK
Replied by TONK on topic Re:Crawler box and fitting kit
Has anybody used off road armourys t-box

Please Log in or Create an account to join the conversation.

Time to create page: 0.127 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.