Tyre Sizes - Rough Guide Thread
- Minjim86
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Juanjo
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- DS-ZOOK
- Visitor
-
Public
Just trying to experiment with keeping the car as low as possible but with big boots
Please Log in or Create an account to join the conversation.
Just wondering if anyone has tried to run 31s with minimal lift.. like maybe even just 3" with no body lift and just a hell of a guard chop if so how did they go
Just trying to experiment with keeping the car as low as possible but with big boots
You would need to cut away and rebuild the inner wings to make room for the tyres. It would be a lot of work but would be awesome once done!
Please Log in or Create an account to join the conversation.
- DS-ZOOK
- Visitor
-
Public
You would need to cut away and rebuild the inner wings to make room for the tyres. It would be a lot of work but would be awesome once done!
Thanks, this is something im going to be looking further into and possibly doing
all in time
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
- Posts: 2702
- Thank you received: 216
- Points: 21.00
Just wondering if anyone has tried to run 31s with minimal lift.. like maybe even just 3" with no body lift and just a hell of a guard chop if so how did they go
Just trying to experiment with keeping the car as low as possible but with big boots
When did a 3" become a minimal lift

It depends if your running new tyres or remoulds. Also what kind of springs you've installed. Standard lift springs may not lift the vehicle as much as intended if it's loaded with winches, cage, batteries and such.
I run 2" Trail Master Heavy Duty Diesel springs and have no problem running 30" tyres. Next year I will probably swap them for 31" Silverstones as they're not remoulds, and so much lighter.. Which has a noticeable effect on power

+3" Trail Master. Fox 8.0" R/R shocks. ORA HD winchbumper. Warn M8274 Ox-motor + Hellfire gears, Delta-Tek mainshaft and freespool, overvolted. 33/9.5 R16 Silverstone Extreme. 5.14:1 ratio SJ transferbox in RW cradle. OMP rollcage.
Please Log in or Create an account to join the conversation.
- Posts: 4137
- Thank you received: 647
- Points: 2931.00
Cheers
Please Log in or Create an account to join the conversation.
- Posts: 2702
- Thank you received: 216
- Points: 21.00

235/75/15 special tracks. But they're remoulds, so actual height's 30".. And pretty heavy

Wheels are standard 3 spoke alloys. 5,5 x 15" I believe

+3" Trail Master. Fox 8.0" R/R shocks. ORA HD winchbumper. Warn M8274 Ox-motor + Hellfire gears, Delta-Tek mainshaft and freespool, overvolted. 33/9.5 R16 Silverstone Extreme. 5.14:1 ratio SJ transferbox in RW cradle. OMP rollcage.
Please Log in or Create an account to join the conversation.
- Posts: 4137
- Thank you received: 647
- Points: 2931.00
Sorry didnt see it in the signature it's tiny on my phone

Please Log in or Create an account to join the conversation.
- Posts: 34
- Thank you received: 2
- Points: 15.00
I have 215/75/15 General Grabbers fitted - there's millimetres in it, but there's no rubbing or catching - even when flexed.
They look very chunky, and have been fantastic in snow.
#RockyTheJimny
Instagram: @hannahjgill
Please Log in or Create an account to join the conversation.
- Langdonm
- Visitor
-
Public
Guessing I've got no chance with no lift then ?
Would they fit if the arches and bumper were cut ?
Please Log in or Create an account to join the conversation.