A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Castor correction

RichiesJimny
Topic Author
New Member
Public

07 Mar 2013 19:02 #64870 by RichiesJimny

Castor correction was created by RichiesJimny

Having tried and failed to fit the jimny bits economy castor correction bushes (the ones where you only change the front bushes) I'm looking at a full set of castor correction bushes or maybe some rhinoray castor corrected arms. Does anyone on here use rhinorays arms as they do look good value at Â£240 including new bushes and do they work with a 3inch lift.

Please Log in or Create an account to join the conversation.

reaper
New Member
Public

07 Mar 2013 19:04 #64871 by reaper

Replied by reaper on topic Castor correction

What problem are you having fitting them ?

Please Log in or Create an account to join the conversation.

RichiesJimny
Topic Author
New Member
Public

07 Mar 2013 19:06 #64872 by RichiesJimny

Replied by RichiesJimny on topic Castor correction

I've just checked Rays site they are advertised as heat treated not castor corrected :blush:

Please Log in or Create an account to join the conversation.

RichiesJimny
Topic Author
New Member
Public

07 Mar 2013 19:12 #64873 by RichiesJimny

Replied by RichiesJimny on topic Castor correction

reaper wrote: What problem are you having fitting them ?

They are the cheap bushes with no metal ring, when we pressed them in the angle wasn't quite right so the bolts won't go in when we tried pressing them out and they fell to bits.
I don't know if I should buy a set of 4 bushes or get some corrected arms with normal bushes.

Please Log in or Create an account to join the conversation.

reaper
New Member
Public

07 Mar 2013 19:21 #64875 by reaper

Replied by reaper on topic Castor correction

Bugger thats not good
The ora arms are good but depends if you need them that heavy duty
If going for bushes in stock arms its worth spending a bit more on the super-pro ones

Please Log in or Create an account to join the conversation.

RichiesJimny
Topic Author
New Member
Public

07 Mar 2013 19:30 #64878 by RichiesJimny

Replied by RichiesJimny on topic Castor correction

With the super pro's do you press the bush in and then press in the steel insert. Am I right in thinking that its the steel insert that's offset not the bush.

Please Log in or Create an account to join the conversation.

Time to create page: 0.204 seconds

Castor correction

Events Menu