Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Jimny from Australia! (Dead jimny) Ne sj51T build
- darthloachie
- New Member
-
Public
- Monkey
- Topic Author
- New Member
-
Public
18 Jan 2012 12:48 #31229
by Monkey
The bolt on the front radius arm
by removing one bolt on the front of the radius arm on the driver's side, it helps eliminate binding, therefore more flex ( please note, not recommend for on road use)
As for the blue stuff... i wish it would go away :whistle: 35deg here most days at the moment
Replied by Monkey on topic Re: Jimny from Australia Watch this space!!
darthloachie wrote: nice pics as ever
whats a bolt for us dumb poms?
and how do you get all your pictures to have blue at the top?
The bolt on the front radius arm
by removing one bolt on the front of the radius arm on the driver's side, it helps eliminate binding, therefore more flex ( please note, not recommend for on road use)As for the blue stuff... i wish it would go away :whistle: 35deg here most days at the moment
Please Log in or Create an account to join the conversation.
- darthloachie
- New Member
-
Public
- Monkey
- Topic Author
- New Member
-
Public
18 Jan 2012 22:48 - 18 Jan 2012 22:52 #31295
by Monkey
Replied by Monkey on topic Re: Jimny from Australia Watch this space!!
The one in front of the axle try it, you will be amazed how much flex is gained...:silly:
try it, you will be amazed how much flex is gained...:silly:
Last edit: 18 Jan 2012 22:52 by Monkey.
Please Log in or Create an account to join the conversation.
- Cocopolo
- New Member
-
Public
- Monkey
- Topic Author
- New Member
-
Public
19 Jan 2012 10:24 #31314
by Monkey
Maybe if you had 500+HP You would have to bend a whole arms before it would move....
Anyway, here's my sliders...
Replied by Monkey on topic Re: Jimny from Australia Watch this space!!
Cocopolo wrote: There is no risk to make the axle rotate too much when you give power?
The meaning of having 2 bolts on each arm is to prevent axle to rotate when you apply torque ...
Maybe if you had 500+HP
You would have to bend a whole arms before it would move....Anyway, here's my sliders...
Please Log in or Create an account to join the conversation.
Time to create page: 0.159 seconds