A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Jimny JB74 (2019+) – Torque Pro PID for TPMS (tire pressure monitoring)
My thought on this was that you wouldn't see the sensors on the canbus, you would see the Continental tpms controller which would be a single ID . Looking at those numbers you have are they not the tyre TPMS sensor id, not a canbus ID . I thought canbus id were just a couple of hexadecimal digits
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
