A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Wobbly Gear Stick
- RyanWalkley
- Topic Author
- Offline
- New Member
-
Registered
23 Nov 2024 19:26 #258482
by RyanWalkley
Wobbly Gear Stick was created by RyanWalkley
I just replaced the Clutch on my 2004 Jimny. However, when I went to refit the gearstick into the remote housing it was wobbly as hell. After some googling I think I may have lost a plastic bush. I have a service manual and it isn't clear what I'm missing (Please see attached picture).
I've found two types of bushes online but I'm not sure which one I need:
shorturl.at/jWZYq
shorturl.at/zab5m
Any help will be much appreciated.
Thanks.
I've found two types of bushes online but I'm not sure which one I need:
shorturl.at/jWZYq
shorturl.at/zab5m
Any help will be much appreciated.
Thanks.
Please Log in or Create an account to join the conversation.
- Darthblaker7474
-
- Offline
- Elite Member
-
Registered
24 Nov 2024 15:57 #258487
by Darthblaker7474
Replied by Darthblaker7474 on topic Wobbly Gear Stick
There should be two plastic bushes, one on the end of the lever (pictured) and another in the receiving hole (same colour)
Please Log in or Create an account to join the conversation.
- RyanWalkley
- Topic Author
- Offline
- New Member
-
Registered
- RyanWalkley
- Topic Author
- Offline
- New Member
-
Registered
Time to create page: 0.305 seconds