A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
IAT Sensor - where does it go ?
samui
Topic Author
New Member
Public
LessMore
Thank you received: 0
04 Oct 2016 14:43 - 04 Oct 2016 14:45#173147by samui
I just bought a 2005 1.3 4x4 soft top jimny that is missing the IAT sensor from the air box...problem is that i cant see where to connect this to after i buy a new sensor !
i dont see any hanging plugs that would help...diagram in service manual only shows filter side -- can someone help with pics if possible !
You have sort of answered your own question. The IAT sensor (intake air temperature sensor) lives at the back of the air box, May differ a little on the different models/engines on each jimny, But should be there. Is the old one still installed and plugged in? If so there would be no available plug?
Thanks for the reply and pic.... I know it goes on the air box housing..problem is the other end. I dont see any connectors hanging unplugged..please advise. And no the hole is empty on air box...i can get a new one no worries but what connector goes to it and where doea that lead to ...cheers
The plug connector is on quite a long bit of loom as i recall, So it may well of dropped down under the inlet manifold/fuse box or been tucked up out of the way by the previous owner.
