A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
how thick is the metal in the jimny boot?
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
29 Feb 2016 20:35 #163163
by jackonlyjack
Replied by jackonlyjack on topic how thick is the metal in the jimny boot?
if you do go down the removing route
where the seat mounts and seatbelts
look for the spot welds and drill off the welds
as you need to keep the cross member in
Jack
where the seat mounts and seatbelts
look for the spot welds and drill off the welds
as you need to keep the cross member in
Jack
Please Log in or Create an account to join the conversation.
- Jim Jimny 95
- Topic Author
- New Member
-
Public
Time to create page: 0.137 seconds