A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Transfer box not disengaging
- troggy
- Topic Author
- New Member
-
Public
22 Nov 2015 12:21 #156875
by troggy
Replied by troggy on topic Transfer box not disengaging
Many thanks to all, I'll give it a go.
By the way, just knocked up a new vac system to be routed through engine bay, using 3/16 copper and a drilled lump of brass as a t piece, with pipes soldered in, will get a pic when I work out how to do it!
By the way, just knocked up a new vac system to be routed through engine bay, using 3/16 copper and a drilled lump of brass as a t piece, with pipes soldered in, will get a pic when I work out how to do it!
Please Log in or Create an account to join the conversation.
- troggy
- Topic Author
- New Member
-
Public
- gusthegorilla
- New Member
-
Public
- troggy
- Topic Author
- New Member
-
Public
- gusthegorilla
- New Member
-
Public
- troggy
- Topic Author
- New Member
-
Public
24 Nov 2015 20:23 #157137
by troggy
Replied by troggy on topic Transfer box not disengaging
She get's her maintenance for free, so stuff her. 
At least she's working now and I've told her to buy her own sodding petrol!
At least she's working now and I've told her to buy her own sodding petrol! Please Log in or Create an account to join the conversation.
Time to create page: 0.421 seconds