New CAT
- fozzie
- Topic Author
- New Member
-
Public
- Thank you received: 0

Please Log in or Create an account to join the conversation.
- Daniel30
- New Member
-
Public
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- fozzie
- Topic Author
- New Member
-
Public
- Thank you received: 0
Daniel30 wrote: Nice....... did you weld it?
Yes. A little piece of 8mm bar welded onto the side of the pipe. Very lucky that it had been off recently

I think that it should hold it for the next MOT.
My trusted indie showed me a CAT from Eurocarparts for the Jimmy and it's half the size of the original. I'll have to make a choice when it's time to replace it. A cheap one that lasts 12 to 24 months or the mega-bucks original from Suzuki

Please Log in or Create an account to join the conversation.
- ZookFastback
- New Member
-
Public
- Thank you received: 0
My system is 2" all the way from the headers (Extractors) through to exit.
Click here for link
Please Log in or Create an account to join the conversation.
- Daniel30
- New Member
-
Public
- Thank you received: 0
ZookFastback wrote: I welded in one of these 2" 100CPSI Cats about 4 years ago, still going strong. I went for 100CPSI instead of the Suzuki 400CPSI for better gas flow. There is a lot less restriction with 100 cells per square inch as opposed to 400 cells per square inch. Gives the exhaust a nice note too. :evil:
My system is 2" all the way from the headers (Extractors) through to exit.
Click here for link
So does this Di away with the CAT??
Please Log in or Create an account to join the conversation.
- ZookFastback
- New Member
-
Public
- Thank you received: 0

Please Log in or Create an account to join the conversation.