A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Apec Brakes
21 Jul 2015 12:49 #148180
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Apec Brakes
The early discs to 2004 have a "centering distance" (I think it means hole) of 107mm, and are cheap.
Yours have a "centering distance" of 108.3 mm and are post 2004.
If you have a big enough lathe, you could get the cheaper ones and machine them to fit I suppose
Yours have a "centering distance" of 108.3 mm and are post 2004.
If you have a big enough lathe, you could get the cheaper ones and machine them to fit I suppose
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- BrynHIMself
- Topic Author
- New Member
-
Public
22 Jul 2015 12:47 #148252
by Busta
Replied by Busta on topic Apec Brakes
Unless it's changed on the newest models, all Jimny discs are solid.
The pictures of vented discs on ebay adverts are generic images, not the specific ones being sold.
The pictures of vented discs on ebay adverts are generic images, not the specific ones being sold.
Please Log in or Create an account to join the conversation.
- BrynHIMself
- Topic Author
- New Member
-
Public
- BrynHIMself
- Topic Author
- New Member
-
Public
Time to create page: 0.301 seconds