A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Creeky stearing
- Wiltec17
- New Member
-
Public
Less
More
- Thank you received: 0
09 May 2014 12:37 #114596
by Wiltec17
Replied by Wiltec17 on topic Creeky stearing
I've got a creak (accompanied by a loud knock occasionally) when turning noticeable when standing still or moving very slowly, I checked underneath and found a worn o/so panhard rod bush.
Please Log in or Create an account to join the conversation.
09 May 2014 14:00 #114602
by Halford
it's FaceTwit, :dry:
I had this, but it went away after I had the front wheels tracked at ATS for £30
possibly the "dip" when parking up on full lock, then unparking later (if you know what I mean) put excess stress on steering components causing it to moan a bit.
might be worth a try if you've tracking symptoms .... like driving a clown car, wallowing into/out of corners :blink:
Replied by Halford on topic Creeky stearing
kirkynut wrote: Sorry mate but I'm not on BookFace.
it's FaceTwit, :dry:
I had this, but it went away after I had the front wheels tracked at ATS for £30
possibly the "dip" when parking up on full lock, then unparking later (if you know what I mean) put excess stress on steering components causing it to moan a bit.
might be worth a try if you've tracking symptoms .... like driving a clown car, wallowing into/out of corners :blink:
Please Log in or Create an account to join the conversation.
- Tommo
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
09 May 2014 19:51 #114645
by Tommo
Replied by Tommo on topic Creeky stearing
I'm going to investigate tommorow
But to rule out some ideas, the tracking has been done recently so it can't be that.
The pan hard rod bushes I changed last week in an attempt to fix death wobble
I will up load another video later on, and the noise has got louder
Could it be track rod ends?
But to rule out some ideas, the tracking has been done recently so it can't be that.
The pan hard rod bushes I changed last week in an attempt to fix death wobble
I will up load another video later on, and the noise has got louder
Could it be track rod ends?
Please Log in or Create an account to join the conversation.
Time to create page: 1.761 seconds