A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Torque wrench
- UKDAN
- New Member
-
Public
17 May 2013 16:36 - 17 May 2013 17:48 #70925
by UKDAN
I've just been through the jimjam workshop manual (early G13BB single cam engine) & each section has a list of all the torque settings in that section.
Here's a list of the highest:
Wheel bearing lock nut 220Nm
Pitman arm nut 135Nm
Transfer box flange nut 130Nm
Crankshaft timing belt pulley bolt 128Nm
Pulley nut 111Nm
Wheel nut 95Nm
So a Torque wrench that goes up 220Nm will cover all jobs on the Jimny.
Dan
Replied by UKDAN on topic Torque wrench
maverick wrote: But what you/me really want is a list of ALL the Torque settings on a Jimny - now that woud be ace....
I've just been through the jimjam workshop manual (early G13BB single cam engine) & each section has a list of all the torque settings in that section.
Here's a list of the highest:
Wheel bearing lock nut 220Nm
Pitman arm nut 135Nm
Transfer box flange nut 130Nm
Crankshaft timing belt pulley bolt 128Nm
Pulley nut 111Nm
Wheel nut 95Nm
So a Torque wrench that goes up 220Nm will cover all jobs on the Jimny.
Dan
Last edit: 17 May 2013 17:48 by UKDAN.
Please Log in or Create an account to join the conversation.
17 May 2013 16:42 #70926
by maverick
Maybe we could get Martin's attention and get him to put these into sinlge page where everytime someone came acrss a Torque Setting they could add it ... until that happens I'll open a new thread called Jimny Torque settings and anyone can add them there ....
Jalapeño, IISY?
Replied by maverick on topic Torque wrench
UKDAN wrote:
maverick wrote: But what you/me really want is a list of ALL the Torque settings on a Jimny - now that woud be ace....
I've just been through the jimjam workshop manual & each section has a list of all the torque settings in that section.
Here's a list of the highest:
Wheel bearing lock nut 220Nm
Pitman arm nut 135Nm
Transfer box flange nut 130Nm
Crankshaft timing belt pulley bolt 128Nm
Pulley nut 111Nm
Wheel nut 95Nm
So a Torque wrench that goes up 220Nm will cover all jobs on the Jimny.
Dan
Maybe we could get Martin's attention and get him to put these into sinlge page where everytime someone came acrss a Torque Setting they could add it ... until that happens I'll open a new thread called Jimny Torque settings and anyone can add them there ....
Jalapeño, IISY?
Please Log in or Create an account to join the conversation.
- Swifty
- Topic Author
- New Member
-
Public
17 May 2013 16:46 #70929
by Swifty
Replied by Swifty on topic Torque wrench
Cheers all, this is what I was after, 
Please Log in or Create an account to join the conversation.
- UKDAN
- New Member
-
Public
- GuardianAngel
- New Member
-
Public
- UKDAN
- New Member
-
Public
Time to create page: 0.164 seconds