A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Bleed valve sizes for front and rear brakes
- gus2000
- New Member
-
Public
27 Jan 2013 00:25 #59791
by gus2000
:whistle: It is not necessary :whistle:
with a warm handshake it is enough
Cheerio
Replied by gus2000 on topic Re: Bleed valve sizes for front and rear brakes
GuardianAngel wrote: Gustavo, rest assured, if you were here, I would kiss you :kiss: :kiss: :kiss:
Thanks!
:whistle: It is not necessary :whistle:
with a warm handshake it is enough Cheerio
Please Log in or Create an account to join the conversation.
- GuardianAngel
- Topic Author
- New Member
-
Public
27 Jan 2013 22:32 #59919
by GuardianAngel
Hi Gustavo, I don't suppose you know the length of the front bleeder valve? I have a choice of M10 x 1 @ 27.03mm or 37.41mm in length. I could just order both as they are just a few quid but I don't like waste!
Replied by GuardianAngel on topic Re: Bleed valve sizes for front and rear brakes
gus2000 wrote: Front, caliper of disc Plug bleeder
Part N° Suzuki 55473-82030
to verify (m10x1.0)
Rear, plug bleeder cilinder of drum
55473-70AA0
I didn't find the dimensions, but I have a picture of the cylinder
Gustavo
Hi Gustavo, I don't suppose you know the length of the front bleeder valve? I have a choice of M10 x 1 @ 27.03mm or 37.41mm in length. I could just order both as they are just a few quid but I don't like waste!
Please Log in or Create an account to join the conversation.
- gus2000
- New Member
-
Public
Time to create page: 0.141 seconds