A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Front anti roll bar
- Gromit
- New Member
-
Public
Less
More
- Thank you received: 0
15 Feb 2011 19:11 #11577
by Gromit
Replied by Gromit on topic Re: Front anti roll bar
Mmmm, think I'm gonna rip mine off before Tong this Sunday.
Please Log in or Create an account to join the conversation.
- George 147
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
15 Feb 2011 19:43 #11585
by George 147
Replied by George 147 on topic Re: Front anti roll bar
Thats it its coming off ! Thanks for your advice and comments everybody
Please Log in or Create an account to join the conversation.
- biggaz
- New Member
-
Public
Less
More
- Thank you received: 0
15 Feb 2011 20:03 #11587
by biggaz
Replied by biggaz on topic Re: Front anti roll bar
yeh get them off!
Gromit, thought yours would have been long gone by now!
Gromit, thought yours would have been long gone by now!
Please Log in or Create an account to join the conversation.
15 Feb 2011 20:04 #11588
by andyw
Replied by andyw on topic Re: Front anti roll bar
yep as every one says, but dont forget to tell your insurance as it's a mod;)
Andy
Andy
Please Log in or Create an account to join the conversation.
- Gromit
- New Member
-
Public
Less
More
- Thank you received: 0
18 Feb 2011 15:51 #11741
by Gromit
Replied by Gromit on topic Re: Front anti roll bar
What about the MOT, surely it has to be put back on for the test ???
Please Log in or Create an account to join the conversation.
- biggaz
- New Member
-
Public
Less
More
- Thank you received: 0
18 Feb 2011 15:55 #11743
by biggaz
Replied by biggaz on topic Re: Front anti roll bar
wouldnt have thought so, dont think its compulsory.
if it has one fitted it needs to be working/bush's etc but if not then itll be fine.
if it has one fitted it needs to be working/bush's etc but if not then itll be fine.
Please Log in or Create an account to join the conversation.
Time to create page: 2.810 seconds