A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Re:Gen 4 question

More
13 Sep 2022 16:50 - 13 Sep 2022 16:50 #244955 by jackonlyjack
Gen 4 question was created by jackonlyjack
any gen 4 owners have alloys fitted and can answer this question for me
what diameter is the wheel centre bore ?
reason for asking i have found some reasonable priced 16 x 5.5 alloys on ebay 
listing says centre bore is 105mm 
thanks   Jack
Last edit: 13 Sep 2022 16:50 by jackonlyjack.

Please Log in or Create an account to join the conversation.

More
13 Sep 2022 16:51 #244956 by mlines
Replied by mlines on topic Re:Gen 4 question
Gen4 are the same as ABS gen3 - 108.3mm

Sent from my moto g42 using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: jackonlyjack

Please Log in or Create an account to join the conversation.

More
13 Sep 2022 17:00 #244957 by jackonlyjack
Replied by jackonlyjack on topic Re:Gen 4 question
Thanks Martin i thought they where same
maybe a miss print on add  description 

 

Please Log in or Create an account to join the conversation.

Time to create page: 0.151 seconds
Joomla template by a4joomla