A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Re:Gen 4 question
- jackonlyjack
-
Topic Author
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2990
- Thank you received: 674
13 Sep 2022 16:50 - 13 Sep 2022 16:50 #244955
by jackonlyjack
Gen 4 question was created by jackonlyjack
any gen 4 owners have alloys fitted and can answer this question for me
what diameter is the wheel centre bore ?
reason for asking i have found some reasonable priced 16 x 5.5 alloys on ebay
listing says centre bore is 105mm
thanks Jack
what diameter is the wheel centre bore ?
reason for asking i have found some reasonable priced 16 x 5.5 alloys on ebay
listing says centre bore is 105mm
thanks Jack
Last edit: 13 Sep 2022 16:50 by jackonlyjack.
Please Log in or Create an account to join the conversation.
13 Sep 2022 16:51 #244956
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Gen 4 question
Gen4 are the same as ABS gen3 - 108.3mm
Sent from my moto g42 using Tapatalk
Sent from my moto g42 using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: jackonlyjack
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
Topic Author
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2990
- Thank you received: 674
13 Sep 2022 17:00 #244957
by jackonlyjack
Replied by jackonlyjack on topic Re:Gen 4 question
Thanks Martin i thought they where same
maybe a miss print on add description
maybe a miss print on add description
Please Log in or Create an account to join the conversation.
Time to create page: 0.198 seconds