A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
New "Suzuki" hybrid 4x4
14 Nov 2020 08:19 #229999
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
New "Suzuki" hybrid 4x4 was created by mlines
Anyone looking at it? First proper hybrid from "Suzuki".
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Reason2doubt
-
- Offline
- Platinum Member
-
Registered
- GeorgeC
- New Member
-
Public
14 Nov 2020 11:29 - 14 Nov 2020 11:31 #230016
by GeorgeC
Replied by GeorgeC on topic New "Suzuki" hybrid 4x4
For my 6km commute, I would like to see the basic TESLA "Milk Float" tray assembly under the Current Jimny body. There is one being built in Sydney.
Just imagine a "retro electric 2CV" with the same tray as an electric vehicle.
Just imagine a "retro electric 2CV" with the same tray as an electric vehicle.
Last edit: 14 Nov 2020 11:31 by GeorgeC.
Please Log in or Create an account to join the conversation.
Time to create page: 0.183 seconds