A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Re:Exhaust heat shields

Jonners
Topic Author
New Member
Public

10 Aug 2020 21:30 #226489 by Jonners

Replied by Jonners on topic Re:Exhaust heat shields

Hi Lambert going to try heat shied tape and clamps but if that does not work will go down that route. Also noticed that aftermarket systems do not include heat shields

Remind me what rain/damp grass is!!!! Thanks for reply

Please Log in or Create an account to join the conversation.

Scimike
Offline
Platinum Member
Registered

10 Aug 2020 21:42 #226490 by Scimike

Replied by Scimike on topic Re:Exhaust heat shields

Ah Ok, never seen them, well not on my Jimny. Most of the exhaust post cat is behind my transfer guard and the bit to the rear silencer is not that hot in my opinion.
I have used exhaust tape on my son's MR2 to replace the heat shield on the manifold section, it worked very well at controlling the heat, I used an infrared temperature gauge to check it's performance. That said however I doubt it's going to last in an off road environment, it's a bit fragile.
Not a problem for the MR2;)

Yokohama Geolanders, Sony head unit, NAUTILUS Air Horn, DRL conversion, Rear cargo space, Elvis Bobblehead, transfer Guard, Indian hanging Elephant, Koni Heavy track dampers, Custom SS exhaust, Voodoo Doll, Adventure Rack with LED ight bar, vintage ERIBA caravan usually attached (yes it's slow)

Please Log in or Create an account to join the conversation.

Jonners
Topic Author
New Member
Public

11 Aug 2020 07:56 #226498 by Jonners

Replied by Jonners on topic Re:Exhaust heat shields

OK. Thanks for info. Guess a lot just fall off without you knowing and it seems to make no difference. Tape seems to be be the answer if you bother at all

Please Log in or Create an account to join the conversation.

Time to create page: 2.316 seconds

Re:Exhaust heat shields

Events Menu