A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Jimny Fox suspension
- Nikola
- Topic Author
- New Member
-
Public
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
- Nikola
- Topic Author
- New Member
-
Public
29 Sep 2019 15:59 #214011
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic Jimny Fox suspension
He sold them to me 
Awaiting mr postman for them at the moment.
They are the 2.0 body, remote reservoir and have 8" travel to work with +3" springs. I dont know much more about them than that until they arrive. These are fronts only. I need to look more into the rear options, but expect them to be similar spec except with an eye at both ends. Also looking at hydraulic bump stops & limit straps for obvious reasons.
Tom sent me some useful links about setting them up (messing about with shims, oil and nitrogen). I will be reporting back once ive had a fiddle about
...
www.crawlpedia.com/shock_tuning.htm
Awaiting mr postman for them at the moment.
They are the 2.0 body, remote reservoir and have 8" travel to work with +3" springs. I dont know much more about them than that until they arrive. These are fronts only. I need to look more into the rear options, but expect them to be similar spec except with an eye at both ends. Also looking at hydraulic bump stops & limit straps for obvious reasons.
Tom sent me some useful links about setting them up (messing about with shims, oil and nitrogen). I will be reporting back once ive had a fiddle about
...www.crawlpedia.com/shock_tuning.htm
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
- Nikola
- Topic Author
- New Member
-
Public
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
29 Sep 2019 16:15 #214014
by jackonlyjack
Replied by jackonlyjack on topic Jimny Fox suspension
If they're going on Ulysses and you're planning getting rid of the 2" lift give me a shout 
Please Log in or Create an account to join the conversation.
Time to create page: 1.071 seconds