A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Spark plugs

Max Headroom
Offline
Banned
Registered
OPEN AIR MOTORING... 93 MILLION MILES OF HEADROOM

05 Jan 2019 12:28 - 05 Jan 2019 12:29 #200047 by Max Headroom

Replied by Max Headroom on topic Spark plugs

You might well be right Lambert - thats why I added that paragraph at the end of my last post. The question hangs over what that threaded part on the damper is attached to internally.
However if the two nuts are being tightened against each other at the attachment points without applying any torque to the stud on the damper itself I would think that a standard torque could apply on the two nuts.

Not sure that makes sense but hopefully so

IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS

Last edit: 05 Jan 2019 12:29 by Max Headroom.

Please Log in or Create an account to join the conversation.

Cremator1
Topic Author
New Member
Public

05 Jan 2019 13:35 #200052 by Cremator1

Replied by Cremator1 on topic Spark plugs

Hi yes lambert that is the nut I am talking about on the spindle of the damper

Please Log in or Create an account to join the conversation.

Time to create page: 0.163 seconds

Spark plugs

Events Menu