A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Jimny Body Mod
Less
More
- Posts: 762
- Thank you received: 226
09 Dec 2017 08:22 #187200
by zukebob
I started out with nothing & still have most of it left
Jimny Body Mod was created by zukebob
I haven't seen anything like this advertised. I'm curious if anyone on the forum has seen a kit that is similar. It doesn't seem to have any provisions for a soft-top so I certainly wouldn't take it through mud but otherwise looks interesting.
I started out with nothing & still have most of it left
Please Log in or Create an account to join the conversation.
- Daniel30
- New Member
-
Public
Less
More
- Thank you received: 0
09 Dec 2017 09:08 #187201
by Daniel30
Replied by Daniel30 on topic Jimny Body Mod
That does look good
Please Log in or Create an account to join the conversation.
09 Dec 2017 09:26 #187202
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Jimny Body Mod
I would be interested in where it attaches to the main structure of the Jimny. Whilst clearly stronger than a canvas top it really needs to go down to the floor by the body mounts and have spreader plates to act as a proper cage
Sent from my Nexus 6P using Tapatalk
Sent from my Nexus 6P using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Daniel30
- New Member
-
Public
Less
More
- Thank you received: 0
09 Dec 2017 09:29 #187203
by Daniel30
Replied by Daniel30 on topic Re:Jimny Body Mod
I would think it’s purely for looks
Please Log in or Create an account to join the conversation.
- rappey
- New Member
-
Public
Less
More
- Thank you received: 0
09 Dec 2017 19:04 #187226
by rappey
Replied by rappey on topic Re:Jimny Body Mod
Looks like a hard top thats been chopped.. Does look good though.. Look at how far back the rear seats are..
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 3014
- Thank you received: 683
09 Dec 2017 19:31 #187230
by jackonlyjack
Replied by jackonlyjack on topic Re:Jimny Body Mod
Rear seats do recline but can't remember how far back they gorappey wrote: Looks like a hard top thats been chopped.. Does look good though.. Look at how far back the rear seats are..
Please Log in or Create an account to join the conversation.
Time to create page: 1.205 seconds