Lockin hubs conversion

Hey guys must get this sorted , right i am not sure if my 4x4 is working i fitted sj hubs wif the spacer rings , i jacked up the jimny in 4WD and hubs locked , am i right in thinking if i spin 1 wheel the other shud spin aswell ? Well it doesnt , i still have the flashing 4x4 will this stop it from working ???, i did not do the bridge on the connector as was unsure what i was supose to bridge , i did not get the fact that if i bridged/ cut that white connector off that is circled on pic above how everything would work , i took it that i wasnt plugging it bk in so how would this work not connected to nothing ? Thanks guys hope yas can help

jimmyp wrote: i am not sure if my 4x4 is working i fitted sj hubs wif the spacer rings , i jacked up the jimny in 4WD and hubs locked ,

Did the prop turn when you rotated the wheel. Try holding the prop still and turning the one wheel.
S'up to you if you bridge the wires...........the flashing light is electronics; now you have taken off the vac operated hubs the control is all yours my friend, not the f lights.